biohazardous_customz

It would work if you did them in the center grill......plenty of space.... I wounted my police lights there with no problem and they are twice as big as any fogs are.....


btw this is from about 2 feet away from my car thats why they are dim.......if you stand back more than 10 feet they blind the hell out of you..... so fogs would show through no problem

Ill try and get video of them tonight and repost to show how bright they are

Grime

yeah the middle would work fine, plenty of room, just not on the sides.

Archngl

would these fit?
http://cgi.ebay.com/ebaymotors/EURO-...QQcmdZViewItem

wanachat15

yes they would fit if you stick to this thread. but i think they might stick out just a little. i don't think that should be an issue.


------tom

Archngl

great! cause I'm thinking about getting some custom grilles made with slots for these fogs. I'll post pics once it's done!

chubster41

just got these fog lights and damm they are bright...just waiting for some time to install them..

couple questions tho:
i just got my xb awhile back so not to savy about the xb like I was with my tc

how the heck do u take off the side lower grills?
I cant figure out how to.

Where have you guys installed the swiched supplied?

How long has it took you guys to install these?

wanachat15

the two lower grille on the sides? you pretty much just pull on them while pushing on the center one right next to it. pushing on the center one will help with easy removal. but pretty much just pull on them.


-------tom

scyon

ok here is my problem I have a RS3 and I ran the lights and found the wire in the dash that go to the lights and they wont work. I tried 3 diffrent switches and check the fuse (which was fine) and tested the lights.I cant find if there is a relay any where could some one please help me....

Eddie

black_sand_box

Relay?

scyon

Yea like a relay for your horn or for door locks ect... Mine just wont work and I dont really want to run new wires..

black_sand_box

Did you wire into the factory fog wire? My understanding is(I may be wrong) that the relay for the factory lights isn't installed unless the factory lights are/were actually installed.

scyon

Yes I did wire direct to that.. and thank you for your awnser. now I need to find where the relay goes ...I know where the fuse is and I looked in the engine bay for the fog light relay and nothing. So any help would be greatly appreciated

Thank you
Eddie

chubster41

did you guys take the bumper off to install these fogs?

Grime

no. only thing I took off was the fog light covers

chubster41

do any of you guys have a close up picture of where you guys bolted the ground from the fogs?

Grime

I don't have any pictures, but I just bolted the ground onto the existing bolt that held the bottom of the bumber onto the radiator support, it was like 3 inches away.

black_sand_box

Hmm, I'm not sure where it's located. Near the fuse panel maybe..? Check the tech section.

panda-JORDANxi-box

cheap and clean i used to have some fogs that were 12 bucks

VW2xB

I have the lights already but I was thinking about getting a new CF lower lip. In your opinion, would you drill into the new CF Lip for these lights? Im kinda undecided right now. I don't want to spend $40 on those stupid grill things either, but I don't want to drill into a brand new $250 CF lip either.

ajayaitch

Relay:
http://www.trdsparks.com/displaypart...&parts_id=1452

Install (find the pertinent info in here):
http://www.trdsparks.com/install/08590-52820inst.pdf

Tips:
https://www.scionlife.com/forums/vie...+light+install