I sent you a PM, driving to Northeast Philly is fine with me.

 

shees. i dont see any pics of the beam pattern of these projection lights. zero kb and a questionmark. seems like the build quality of these can be labeled junk? only b/c when you have fogging inside a sealed casing, it can lead to probs with an electrical part. i think i'll just stick some hid's in my stocks, when i buy an xB. which should be this week.

 

Go to page four of this thread to see pics of the light output. Mine do not fog. Putting HIDs in the stock housings is a bad idea.

 

i had to take mine off since last time i posted in here....i had major fogging issues and leaking issues with the passenger side light. took it out...there were no holes anywhere, resealed the light...next time it rained, same outcome. so i just put the stock ones back on and im leaving it at that for now on. sux tho cuz i really liked the projector headlights

 

What bulbs would you guys recommend for the projectors? I would like ones with a little bit of bluish tint? I was looking into the Pure Blue Luminics, but I'm hearing horror stories about Luminics burning out the harnesses, and they are a little too blue for my taste. I was then looking at Silverstars, but I was told that you can barely tell a difference between those and the stock bulbs? Then there is PIAA, but they are a little out of my price range. What do you guys think? Also, I want a colored turn signal, where can I get one, and which part # do I need? I was told its 1157 for the turn signal, but is 1157 the number I would look for in a LED?

 

luminics don't burn out harnesses on the xA or xB, only the tC, mainly because the tc's is cheaper.

 

just get silverstars

 

I have a Polar White Xb with a black grill.. what set of these projectors should I get..

I am definately getting the black trim. But as for the LOW BEAM projectors...

the blue tint, or clear?

 

Blue tinted bulbs look crappy in projectors.

 

any of you guys that took yours out (the blue/black k2 Sonar ones) wanna sell me your drivers side. Good ol evovector on ebay sold me a crap set where the drivers side LED halos were ripped outta the circuit boards and unfixable and they wont refund/exchange me. Only reason I took it apart was to reseal it as it was fogging like crazy and I saw the wires just hanging in there.....niiiice

 

any DIY for the halos? i know i saw one but cant find it.

 

Use some t-taps, and female spade connectors, and tap in to the parking lights.

 

which wires?? any links

 

it's in this thread.

 

Wire stuff here:

https://www.scionlife.com/forums/vie...561398#1561398

 

i wanna know if there are any eyelids out there that will fit the sonar headlights. links of pics please

 

iwant to know if there are eyelids out there that will fit the sonar headlights links or pics please

 

I don't know of any, I would like some also.

 

That's sweet, looks like one i've seen around, but with a cover on them to give it that OEM look.

 

i want these lights but i live on the south and humdity is a _____ ? herd some fog issues ? bump for update ?