ilovemybox

my search results came back with nothing that had anything to do with lip kits. so sorry if there is already a thread like this.
i just droped my box with s techs and i like where the wheels sit but i want it to look lower to the ground via a lip kit not much just a little.
can i see some pics of your lip kits

EMU

2 of the ones that i carry and the first is my car and my homies car

parto-D lip kit

Red Genie


both of which i can get for you if interested

Dingo

Heres the front of the K-Style kit (Kenstyle knockoff).

nnnickkk

that red genie is so hot.

TerribleTed

Extreme Dimensions F-1 kit




also plenty of data here https://www.scionlife.com/parts/?sub=6 here, https://www.scionlife.com/parts/?sub=2 ,and here https://www.scionlife.com/parts/?sub=60.

Dingo

That has to be one of my favorite kits Ted. Looks great on your ride.

SheDrivesA_BSPbB

*bump* i'd like to see some too

greenguyshrek

I Have The PU Front Lip From Ebay.

xB4u2nv

what upper grills are those???

cherryBox

most are sporting a front face finisher, of FFF, very hard to find. I can't for the life of me recall the mfr of the white one...

ted, emu, what's the difference between the parto and the F1 kits? also, would you guys mind posting prices?

ilovemybox

thanks to all of you they all look good i can tell this is going to be a hard desision keep them coming if possible

grizzly_choppers

ABS Dynamics X-1 front and back, X-2 Type 2 sides:

TerribleTed

I don't know about parto. My kit came from an ebay seller and may not be genuine Extreme Dimensions tho it looks identical. It is fiberglass, took alot of fabrication to mount and rework to fit properly. Cost was $400 shipped to me for all 4 pieces.

Orataro

An old picture but I'm still running the JDM OEM bB front lip.

Cinderblock

whoa i like the abs kit. how much was that?

grizzly_choppers

Front and rear of the ABS kit list at $170 each and the sides are $160. They come unpainted.

I don't know if you can find them for other prices somewhere. Those prices are off of the ABS website from a little while back.

-Alex

EMU

between mine and Teds, there is no difference...just the manufacturer/distributor that sells them mine didn't have fabrication, just fit perfect...mine was 475.00 from TCSportline

NYXbScion

iTrader: (1)

I have the F1 kit and had no fitment issues at all.

Sideskirts and drop coming this summer

TerribleTed

Did your front lip have any provisions to mount to the front undershield plastics?? The front piece I got was basically ready to paint and bolt on out of the box....except for no provisions for attaching it down to the lower core support or the plastic shields. I fabricated 6 brackets to duplicate the function of the original 6 long tabs of the factory lip.

How did it mount at the rocker panel?? Mine were made to go on top of the rocker into the door gap and I assume double stick tape in place. These are the areas that I did the most work. Making brackets to the plastics and reinventing the assumed side lip mounting. I used the factory lips glued into the new lips so i could use nearly all factory mounting. Here is a somewhat crappy pic to show this but if you look closely you can see that I am using a factory rubber strip between the body and the lip. The top of mine fit like factory after my mods. I did not like the idea of double taping in the rocker jamb. what if you had to remove the lip later? How much paint damage would result or would the fiberglass crack.



The rear lip I have was made to slip over the existing lip. Fit along the gap between the new lip and the bumper was from zero to perhaps 3/16 of an inch besides working that edge it was fine.

lilenginethatcould

gangsters.

i really am feelin that.