Installing Rumion Vent Visors
#1
Installing Rumion Vent Visors
Anyone who installed their Rumion Window Vent Visors, / rain deflectors.. can help out with my install..
As you may have guessed, the instructions are in japaneese But the pictures do help. Trouble is, the pictures are tough for me to figure out.
You'de think they would be simple, but the clips are a bugger to figgure..
I have been going over & over it, & I sure could use a bit of help..
So if you have done this , PM me or reply in the thread......... or if you can translate japaneese for me, lettme know too. thanks...... jh
As you may have guessed, the instructions are in japaneese But the pictures do help. Trouble is, the pictures are tough for me to figure out.
You'de think they would be simple, but the clips are a bugger to figgure..
I have been going over & over it, & I sure could use a bit of help..
So if you have done this , PM me or reply in the thread......... or if you can translate japaneese for me, lettme know too. thanks...... jh
#2
From what i remember.. all i did was stick the visor on first and then clip the whole thing together with the clips they gave me... but it was a while ago... so i dont quite remember it well..
SinZz--
SinZz--
#3
ok thanks, SinZz...... one question though.... it got to 50 degrees here today!! WOW........ do I ned to wait for warmer weather to stick these one & make 'em stick for years to come??
Is there a minimum temperature for this 3M tape to be ideal???
I dont see higher temps for at least another week.....
thanks agian.. jh
Is there a minimum temperature for this 3M tape to be ideal???
I dont see higher temps for at least another week.....
thanks agian.. jh
#5
Re: Installing Rumion Vent Visors
Originally Posted by jimmbomb
Anyone who installed their Rumion Window Vent Visors, / rain deflectors.. can help out with my install..
As you may have guessed, the instructions are in japaneese But the pictures do help. Trouble is, the pictures are tough for me to figure out.
You'de think they would be simple, but the clips are a bugger to figgure..
I have been going over & over it, & I sure could use a bit of help..
So if you have done this , PM me or reply in the thread......... or if you can translate japaneese for me, lettme know too. thanks...... jh
As you may have guessed, the instructions are in japaneese But the pictures do help. Trouble is, the pictures are tough for me to figure out.
You'de think they would be simple, but the clips are a bugger to figgure..
I have been going over & over it, & I sure could use a bit of help..
So if you have done this , PM me or reply in the thread......... or if you can translate japaneese for me, lettme know too. thanks...... jh
#7
Re: Installing Rumion Vent Visors
Originally Posted by CheapChic
Originally Posted by jimmbomb
Anyone who installed their Rumion Window Vent Visors, / rain deflectors.. can help out with my install..
As you may have guessed, the instructions are in japaneese But the pictures do help. Trouble is, the pictures are tough for me to figure out.
You'de think they would be simple, but the clips are a bugger to figgure..
I have been going over & over it, & I sure could use a bit of help..
So if you have done this , PM me or reply in the thread......... or if you can translate japaneese for me, lettme know too. thanks...... jh
As you may have guessed, the instructions are in japaneese But the pictures do help. Trouble is, the pictures are tough for me to figure out.
You'de think they would be simple, but the clips are a bugger to figgure..
I have been going over & over it, & I sure could use a bit of help..
So if you have done this , PM me or reply in the thread......... or if you can translate japaneese for me, lettme know too. thanks...... jh
http://www.newscionparts.com/product/?id=2736
hey Cheap chick... werent you supposed to come up with a lower grill a while back?? Wasnt it you who asked who wanted one to match the custom upper one??? If so, what happened to your project??? jh
#8
hi jimmbomb, any pics on the installed rumion visors yet? I'm thinking of getting them, but i want to see how they look on a Xb before deciding. and i want to know how you like them. thanks in advance!!
#9
Originally Posted by ninja929
hi jimmbomb, any pics on the installed rumion visors yet? I'm thinking of getting them, but i want to see how they look on a Xb before deciding. and i want to know how you like them. thanks in advance!!
^^^^ lookey here^^^^^^ I like them as I am a smoker, so my windows are always partially cracked..... it was a biotch before I got these with all the seasonal rains in the earlier months... jh
#14
Re: Installing Rumion Vent Visors
Originally Posted by jimmbomb
Originally Posted by CheapChic
Originally Posted by jimmbomb
Anyone who installed their Rumion Window Vent Visors, / rain deflectors.. can help out with my install..
As you may have guessed, the instructions are in japaneese But the pictures do help. Trouble is, the pictures are tough for me to figure out.
You'de think they would be simple, but the clips are a bugger to figgure..
I have been going over & over it, & I sure could use a bit of help..
So if you have done this , PM me or reply in the thread......... or if you can translate japaneese for me, lettme know too. thanks...... jh
As you may have guessed, the instructions are in japaneese But the pictures do help. Trouble is, the pictures are tough for me to figure out.
You'de think they would be simple, but the clips are a bugger to figgure..
I have been going over & over it, & I sure could use a bit of help..
So if you have done this , PM me or reply in the thread......... or if you can translate japaneese for me, lettme know too. thanks...... jh
http://www.newscionparts.com/product/?id=2736
#15
Cause they're JDM. JDM = japanese domestic market, IIRC. They have to be imported from Japan. So not only are you paying for the part, you're paying for shipping, importing fees, etc.
IMO, the Rumion ones look better than the WeatherTech ones. But they have the Rumion badging, and I most certainly don't have a Rumion. Almost like slapping a Lexus emblem on the xB... Just my opinion.
Plus, I'm not a fan of vent visors anyway.
IMO, the Rumion ones look better than the WeatherTech ones. But they have the Rumion badging, and I most certainly don't have a Rumion. Almost like slapping a Lexus emblem on the xB... Just my opinion.
Plus, I'm not a fan of vent visors anyway.
#16
Originally Posted by xseveredveganx
Cause they're JDM. JDM = japanese domestic market, IIRC. They have to be imported from Japan. So not only are you paying for the part, you're paying for shipping, importing fees, etc.
IMO, the Rumion ones look better than the WeatherTech ones. But they have the Rumion badging, and I most certainly don't have a Rumion. Almost like slapping a Lexus emblem on the xB... Just my opinion.
Plus, I'm not a fan of vent visors anyway.
IMO, the Rumion ones look better than the WeatherTech ones. But they have the Rumion badging, and I most certainly don't have a Rumion. Almost like slapping a Lexus emblem on the xB... Just my opinion.
Plus, I'm not a fan of vent visors anyway.
But that leads me to the question, is rumion the name in japan for scion? And if so, do they have an american version? I Like the look of these too, but can't find an american version.
#17
Well, the 1st gen's brother in Japan was the bB. The 2008 bB is an entirely different vehicle from our Scion line. The Toyota Corolla Rumion is the Japanese version of our Scion xB.
Any questions?
Any questions?
#18
Originally Posted by xseveredveganx
Well, the 1st gen's brother in Japan was the bB. The 2008 bB is an entirely different vehicle from our Scion line. The Toyota Corolla Rumion is the Japanese version of our Scion xB.
Any questions?
Any questions?
Thanks..
#19
Yes, they cost a hella lot, but in my opinion, they are the best looking ones I've seen so far, so for me, a personal choice to buck up & $pend$ the extra $$ on the best ones... jh
#20
Re: Installing Rumion Vent Visors
Originally Posted by jimmbomb
Originally Posted by CheapChic
Originally Posted by jimmbomb
Anyone who installed their Rumion Window Vent Visors, / rain deflectors.. can help out with my install..
As you may have guessed, the instructions are in japaneese But the pictures do help. Trouble is, the pictures are tough for me to figure out.
You'de think they would be simple, but the clips are a bugger to figgure..
I have been going over & over it, & I sure could use a bit of help..
So if you have done this , PM me or reply in the thread......... or if you can translate japaneese for me, lettme know too. thanks...... jh
As you may have guessed, the instructions are in japaneese But the pictures do help. Trouble is, the pictures are tough for me to figure out.
You'de think they would be simple, but the clips are a bugger to figgure..
I have been going over & over it, & I sure could use a bit of help..
So if you have done this , PM me or reply in the thread......... or if you can translate japaneese for me, lettme know too. thanks...... jh
We were working on a lower grille, but the supplier for the metal went of of business. I am trying to get them to do a arm rest.
http://www.newscionparts.com/product/?id=2736
hey Cheap chick... werent you supposed to come up with a lower grill a while back?? Wasnt it you who asked who wanted one to match the custom upper one??? If so, what happened to your project??? jh