Are Polk Audio good amps for car?
10-31-2008 | 10:43 AM
#1
Thread Starter
Member
SL Member
Joined: Oct 2008
Posts: 84
From: Iowa
Are Polk Audio good amps for car?
It's a Polk Audio C300.2 850W 2 Chann. Bridgeable Amp for $250 +free shipping +free 8" bazooka. The deal ends today 10/31.
What do you guys think for this amp on a ed sub?
What do you guys think for this amp on a ed sub?
10-31-2008 | 01:19 PM
#2
Senior Member
SL Member
Joined: Mar 2008
Posts: 339
From: Clinton, MS
if your ed sub will work well with this power
14.4 Volts RMS Not Bridged @ 1kHz
4 Ohms 150 watts x 2
2 Ohms 220 watts x 2
14.4 Volts RMS Bridged
4 Ohms 450 watts x 1
then yes.. single 4 ohm.. the amp would put out about 450 watts.. if it's dual 4 ohm.. you'd only get 150
14.4 Volts RMS Not Bridged @ 1kHz
4 Ohms 150 watts x 2
2 Ohms 220 watts x 2
14.4 Volts RMS Bridged
4 Ohms 450 watts x 1
then yes.. single 4 ohm.. the amp would put out about 450 watts.. if it's dual 4 ohm.. you'd only get 150
10-31-2008 | 05:31 PM
#3
Thread Starter
Member
SL Member
Joined: Oct 2008
Posts: 84
From: Iowa
Originally Posted by Slody4Futbol
if your ed sub will work well with this power
14.4 Volts RMS Not Bridged @ 1kHz
4 Ohms 150 watts x 2
2 Ohms 220 watts x 2
14.4 Volts RMS Bridged
4 Ohms 450 watts x 1
then yes.. single 4 ohm.. the amp would put out about 450 watts.. if it's dual 4 ohm.. you'd only get 150
14.4 Volts RMS Not Bridged @ 1kHz
4 Ohms 150 watts x 2
2 Ohms 220 watts x 2
14.4 Volts RMS Bridged
4 Ohms 450 watts x 1
then yes.. single 4 ohm.. the amp would put out about 450 watts.. if it's dual 4 ohm.. you'd only get 150
Thread
Thread Starter
Forum
Replies
Last Post
xdejablu3x
Regional - Mid South
0
12-29-2014 02:15 AM
carid
General Tech and DIY
0
12-04-2014 09:35 AM
