alfundo

iTrader: (2)

HVACs are screw in bulbs, no soldering needed. i was able to make my own faceplate with good quality after scanning my oem.

TrevorS

iTrader: (1)

FYI -- There is no xB3 yet. If the xB gets the 2.5L engine, that would be an xB3.

alfundo

iTrader: (2)

Thanks Trevor, I'm sure your word is final say. Officially, there is no xB2. I didnt call it an xB3 but many in the community consider the changes made for the 2011 model year do warrant that tag. For the purpose of this thread it distinguishes the difference between the 3 varieties of faceplates.

TrevorS

iTrader: (1)

Given the xB2 was barely modified (described by Scion as a "refresh"), I think your "many" is actually very few indeed. Look for a greater than maybe a .01% difference for an xB3. In the meantime, xB2.5 seems to work, but 2011 and later xB is probably the best fit for your purposes. Oh yes, in case you didn't notice, the difference between the xB1 and xB2 is major. Expect something a little more major than a small refresh for an xB3 -- a new engine and transmission would certainly qualify.

TrevorS

iTrader: (1)

Sorry Alfundo, my xB3 remarks should have been directed to "LEDmod", not you. Please accept my apology !

LEDmod

Regarding xB2 or xB3 is term we use to separate (08-10 model and 11-up models)
Yes, there isn't much difference from those two, but for our company, it's a big difference from LED lights to Custom gauge face.
We also have to show the customer, custom gauge face needs to be for different year
We are considering changing the xB3 catagory to something else....
xB2 (08-10)
xB2B (11 and up)
Still under discussion...

LEDmod

Yes, that basicaly it, for customer that is far away from my location (Anaheim, CA)

Scion xB2 Interior LED Conversion: $349.99 Package deal which includes parts and labor [Normally $400]
- Custom gauge face** (Required for gauges to light up other color than red)
- Gauge cluster LED conversion
- Climate control LED conversion
- Free Traction control LED conversion
- Free Steering wheel control LED conversion
- Free Power window control LED conversion
- Free Passenger air bag indicator LED conversion

LEDmod

Our method uses soldering.
We have custom PCB with four 3-chip SMD LED that we solder them on..
It's way brighter than those LED bulb type (1-2 LED)

flyingemu05

i need to get a new HVAC ****/dash panel set and send it in to get done. i messed mine up when i did it and some of the lights on it aren't too bright.

LEDmod

We can use our inserts (also select from different color)
Then we can add the custom LED module in there to make it light up bright..

Stock inserts has some yellowish color in that that, when you do white LED it doesn't come out coor white.

flyingemu05

yeah i have a set of your inserts i got when i ordered my gauge face. i just need to get new HVAC controls then i'll email you about mailing them to get the LEDs changed in it.

TrevorS

iTrader: (1)

I'm sure your primary goal is to accurately communicate the appropriate product for your customer's vehicle. I strongly recommend keeping it as straightforward as possible, and specifying the model year range accomplishes that -- no chance of confusion. If you for some reason strongly prefer to use an "xB" designation (which will probably result in some level of confusion), xB2b communicates much better then xB3 (and is certainly more accurate). Best wishes !

LEDmod

For now, we'll be set for Scion xB2(11-UP)

TrevorS

iTrader: (1)

Excellent, and again, best wishes !

LEDmod

We are running Income Tax Refund Sale!!

This is our first time sale for the Custom gauge face (since 2005)
We kept the same price for 7 years, but we want to give appreciation customer supporting our highest quality custom gauge faces available in the market..
No one has even has come close to our quality...

Normally $149.99, NOW $119.99 (that is 20% off)

Direct ordering page...

alfundo

iTrader: (2)

are your faceplates stand alone or is the oem still needed for proper functioning idiot lights? if you would have offered this price 2 months ago i would have jumped in for sure. good luck with the sale, i will pass the info on!

LEDmod

Stock gauge face will be replaced with our gauge face (so it will be removed)
Our "idiot lights" aka indicator light will function just like stock.. there is no lights bleeding through like other quote quote "custom gauge face"

If you see all of our samples, you'll see that everything will light up just like stock.. no lights bleeding through, precise machine cut and gauge face does not curl.. also same thickness as OEM..

alfundo

iTrader: (2)

awesome info right there! thanks! i may have had you confused with another seller.

LEDmod

No problem...

LEDmod

Sales still going