splicing aftermarket ipod controller into factory one
#21
Originally Posted by Slody4Futbol
Originally Posted by bego
Which plug are you exactly trying to use? you can probably tap into that aux jack cause it should just have two wires in its little harness, being a left and a right audio, if your trying to tap into the ipod plug good luck man I have read a lot of forums about trying to do that I have not heard of any success yet
as for splicing into the stock ipod cable.. your easiest way would be do buy a blank plug from toyota.. remove the ipod socket from the console, replace it with a blank, take a drill bit the same size as the cable and put a notch on the edge of the blank panel, then route your NEW cable out that hole, that way if you ever sell the vehicle, or it gets totalled and you want to remove your radio and the insurance company wants a radio back in it *like happened to me before* then you can put the factory stuff back and it will not be modified =P
Thread
Thread Starter
Forum
Replies
Last Post
TheSilencerTC
Scion tC 2G ICE & Interior
4
02-24-2015 04:56 PM
reagan9000
Scion xA/xB 1st-Gen ICE & Interior
0
01-28-2015 06:20 PM
lunchbx05
PPC: Interior / Electronics
0
12-11-2014 06:13 PM