Cant wait to see some gen2's out there with some camber. Lets see if someone will run the -3 & -5 combined for the -8. I'm doing it right now for the gen1 and I wanna see a gen2 do it.

 

they make -8 camber plates

 

they dont make -8 plates you just put the -3 & -5 on together which equals out to -8.

 

sounds good!!!

Now let see who does it up right with the right wheels and off set and width. I see to many out there just put camber just because..

I see many 2nd gens with weak offsets and width.

Weak offests, Not wide enough wronge wheels = FAIL

YOu have to remember if your already flush.. your also going to have to either kick the wheel back out to compensate or get wider wheels..

If your not flush before you add camber you better be getting some wheel spacers or right width or offests or Fail

 

All true!

 

bump.. anymore peoples interested in these??

Von... can you post the list in your first post, so we got it at the top?? Thanks..

 

These are a ways out guys, just gathering more interest and keeping the idea out there.

 

they do make neg 8 plates my buddy used to stack them now he has a single plate to -8 here is his car me following him

 

any updates???

 

bump for updates... i have a 18x10 waiting for me...

 

I'm in the same boat as scion619, so I put my name for both...

UPDATED LIST

-3 Degrees
1. wolfsburg2k1
2. xseveredveganx
3. redline8k
4. miketf1
5. 1vicissitude
6. xd40tc
7. drewsxb808
8. willow
9. AWOL
10. scion619
11. udanijo
12.
13.
14.
15.

-5 Degrees
1. wolfsburg2k1
2. neek
3. xseveredveganx
4. demonicangel
5. willow
6. AWOL
7. scion619
8. udanijo
9.
10.

 

Me want -5 please............like now

 

i want 2 sets of 5 -10 lol no just a -3 would do for me im all in when they come

 

You can take me off the list. Im no longer interested. Got me some spacers and I have enough negative camber to meet my needs . Look forward to seeings pics though!

 

Bump for this I'm still interested.

 

check www.rockauto.com for chamber kits and bolts

 

Not for the rear, bro. Come on now.

 

Thanks for the tip -- much appreciated !

True, but I'm personally happy to have camber bolts finally available for the front. That's enough to meet my needs.

 

Put me down for -3 please =D

I'll be running 20x10.5 +25 soon lol its gonna be a close one haha

 

I want to be around the same specs. Camber would be nice.

I'm not sure what's up with Dan (dancar420 on the forums, IIRC). I know there is a bit of a demand.