18x9.5 +45 - Any Chance
#22
PDX,
Do you have any detailed pictures of your setup now? I'll be getting some 18x8 40 offset fairly soon. And I have NF's as well that will be going on.
If possible I would really appreciate a few pictures to see how it looks all together.
thanks
good luck with your new setup.
Do you have any detailed pictures of your setup now? I'll be getting some 18x8 40 offset fairly soon. And I have NF's as well that will be going on.
If possible I would really appreciate a few pictures to see how it looks all together.
thanks
good luck with your new setup.
#23
PDX,
Do you have any detailed pictures of your setup now? I'll be getting some 18x8 40 offset fairly soon. And I have NF's as well that will be going on.
If possible I would really appreciate a few pictures to see how it looks all together.
thanks
good luck with your new setup.
Do you have any detailed pictures of your setup now? I'll be getting some 18x8 40 offset fairly soon. And I have NF's as well that will be going on.
If possible I would really appreciate a few pictures to see how it looks all together.
thanks
good luck with your new setup.
The photos on the first page show the 18x8 +40 Koseis with the stock springs. The photos on the second page show it after dropping it on the NF210s. The photos on the 3rd page show it with the addition of the Five Axis lip kit.
PDX_xB
#24
Senior Member
Team ScionEyed
SL Member
iTrader: (1)
Join Date: Jun 2008
Location: Mobile AL
Posts: 523
I have a question if someone can answer or help with with. I found some nice rims that are 17x9 -12 offset and I am going to be running the df120 springs and the hotchkis sway front and rear sways and hp shocks and struts. what tire should i run and what is the wides you think of tire i can run in without rubing. Please help.
#28
if all fails make it work.. i forget the offest on my friends 20s but i know he has 8.5 in the front and 9.5 in the rear.. totaly flush.. just got to roll fenders.. he made a post of his car here awhile back its a blue XB
#29
Marshall, I know you're incredible with the lowered VIP wheel set-up, but don't egg him on; the only way to make 17x9 with -12 offset work on the xB2 is with a widebody kit, and that still might lead to bearing wear problems if it's a daily driver. If your friend is running 8.5 front & 9.5 rear, and totally flush, his offsets have to be in the +25 to +35 range.
Last edited by CIONIDE; 01-26-2010 at 07:51 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Sgtfluffy16
Regional - Northeast
3
07-28-2021 10:32 PM
Darrenohooligan
PPC: Suspension / Brakes
0
09-26-2015 07:21 AM