The OFFICIAL 18" Wheel Thread.... Let's see them
#1283
#1286
Hi, I'm new to this scion world...Would anyone know if 18 X 8.5 +30 would work for a 2014? If so, What size tires?... Also, I've red about something in regards to scrub radius. Apparently, these wheels will have a positive scrub radius of +14mm. Please advise...any help would be greatly appreciated.
Thank you
Thank you
#1287
Hi, I'm new to this scion world...Would anyone know if 18 X 8.5 +30 would work for a 2014? If so, What size tires?... Also, I've red about something in regards to scrub radius. Apparently, these wheels will have a positive scrub radius of +14mm. Please advise...any help would be greatly appreciated.
Thank you
Thank you
#1288
Originally Posted by xb_pnutt View Post
Hi, I'm new to this scion world...Would anyone know if 18 X 8.5 +30 would work for a 2014? If so, What size tires?... Also, I've red about something in regards to scrub radius. Apparently, these wheels will have a positive scrub radius of +14mm. Please advise...any help would be greatly appreciated.
Thank you
Those wheels will poke about 1/2 inch out of the wheel well in front, and if you're lowered, you'll probably need to roll your front fenders....an 18x8.5 with a 40mm offset would fit much better.....dont know anything about scrub radius, and I'm a wheel *****, so I wouldn't worry about that.....if youre set on that wheel, 215/40-18 will help them not to rub....
Thank you for your quick reply pdxgen2.
I really don't mind the 1/2 inch poke. I'm more concerned about rubbing or ruining the handling capabilities. At the moment, I'm not lowered. Any suggestion on what type of springs to use? I really don't want to roll my fenders though :D
Thanks in advance...
Hi, I'm new to this scion world...Would anyone know if 18 X 8.5 +30 would work for a 2014? If so, What size tires?... Also, I've red about something in regards to scrub radius. Apparently, these wheels will have a positive scrub radius of +14mm. Please advise...any help would be greatly appreciated.
Thank you
Those wheels will poke about 1/2 inch out of the wheel well in front, and if you're lowered, you'll probably need to roll your front fenders....an 18x8.5 with a 40mm offset would fit much better.....dont know anything about scrub radius, and I'm a wheel *****, so I wouldn't worry about that.....if youre set on that wheel, 215/40-18 will help them not to rub....
Thank you for your quick reply pdxgen2.
I really don't mind the 1/2 inch poke. I'm more concerned about rubbing or ruining the handling capabilities. At the moment, I'm not lowered. Any suggestion on what type of springs to use? I really don't want to roll my fenders though :D
Thanks in advance...
#1289
New xxr 557
Hey guys ended up getting new wheels for the xB. I didn't plan on getting new wheels but I ended up braking all 4 wheels by hitting a divider and also the xB is considered totaled but I could still drive it. The rear axle beam is bent on one side and the front need some work. But here's my new set up 18x10 te19 xx557.
Might end up selling the car and buying a another xB but this time manual.
Might end up selling the car and buying a another xB but this time manual.
#1292
#1293
#1297
they will fit perfectly...you need to buy the right OEM Toyota lug nuts with built in washers to fit the TC wheels.....also, I would run either 215/40-18 or 225/40-18 tires on those wheels...
#1298
Currently running 17 inch OEM alloys, thinking of upgrading to 18x8 ET35 enkei t6s and 225/40/18 tires, and eventually lowering with tanabe NF210's. looking to A) make the rear wheel a bit more flush with the fender, and B) reduce the gap between the wheel and the fender in the rear (definitely fails the MCM shoe test by a long shot).
am I on the right path here? are there any problems with running ET35 offset with 18x8 all around?
am I on the right path here? are there any problems with running ET35 offset with 18x8 all around?
#1299
Currently running 17 inch OEM alloys, thinking of upgrading to 18x8 ET35 enkei t6s and 225/40/18 tires, and eventually lowering with tanabe NF210's. looking to A) make the rear wheel a bit more flush with the fender, and B) reduce the gap between the wheel and the fender in the rear (definitely fails the MCM shoe test by a long shot).
am I on the right path here? are there any problems with running ET35 offset with 18x8 all around?
am I on the right path here? are there any problems with running ET35 offset with 18x8 all around?
this pic is of 18x8 et35 front, 18x9 et35 rear....the front wheels have 215/40s on there....
Last edited by pdxgen2; 04-03-2017 at 04:15 PM.
#1300