Camry Navigation Install
#23
I tried, but it seems like only a mod can put it on there. So I guess depending on how many people think this is good information, then they will eventually put this in the Tech section.
#25
Originally Posted by _Keith_
Hey do you have to use the JBL amp or can I use a aftermarket amp?
#27
Originally Posted by Spider13
I wonder if out XM box will hook to this?
[img]
This picture was blatantly ripped from SiennaSaurus @ Siennaclub.org, all credit goes to him as he has extensive knowledge about installing the Solara unit in his Sienna.
#31
This is in addition to the install instructions. Apparently, the JBL amp does not power the antenna amplifier as you'll notice when you compare the wire harness and your radio harness. There is one wire that is not used. So what you need to do is splice the ACC (It's the gray wire from the blue radio harness) with the ANT (the black/red stripe wire) together and then you will power the antenna amplifier when you turn on the ignition key. This is illustrated by the red circles.
There is also another wire that I didn't mention either. It's the single wire that comes attached on the Navigation wire harness and this needs to be attached to ground. Any ground will do just make sure it's grounded. I personally did not notice a difference when I didn't connect it and when I did, but that's what the instructions said so I just followed them. This is illustrated in yellow circle.
I would like to thank Troy at OEMValue.com for helping me figure this out otherwise my wife would still be annoyed by the radio's weak reception. Now she's a happier person.
There is also another wire that I didn't mention either. It's the single wire that comes attached on the Navigation wire harness and this needs to be attached to ground. Any ground will do just make sure it's grounded. I personally did not notice a difference when I didn't connect it and when I did, but that's what the instructions said so I just followed them. This is illustrated in yellow circle.
I would like to thank Troy at OEMValue.com for helping me figure this out otherwise my wife would still be annoyed by the radio's weak reception. Now she's a happier person.
#33
Yet another update
Here's yet another update to everyone who wanted to know if you can use an aftermarket amp. Well simply the answer is yes, but you may have to figure out how to splice the rest of the wires to go directly from your vehicle wire harness to the Nav unit. Here's how "petegaz" did it in his 4runner.
http://www.toyota-4runner.org/showth...5&pagenumber=1
He also has a personal site explaining his install if you guys need more info.
http://www.norgetech.com/navsup.htm
I looking into the voice recognition right now, so I'll update everyone again later.
http://www.toyota-4runner.org/showth...5&pagenumber=1
He also has a personal site explaining his install if you guys need more info.
http://www.norgetech.com/navsup.htm
I looking into the voice recognition right now, so I'll update everyone again later.
#35
that is one of the coolest mods i've seen yet. that looks awesome, nice work/. id really love to have that. but i have a DVD player right now and im not sure which one id rather have. DVD player i wouldnt mind getting rid of, but MP3 player is a must. decisions!!.. :twisted: :twisted:
#36
Well I think PIE and Blitzsafe both have AUX controllers that will work on the navi head and this will allow you to connect a MP3/CD changer and still be able to control it from the screen. I think... lemme look into this more.
#37
Well here's what I found out from the messageboard and siennaclub.org
http://www.siennaclub.org/forum/inde...showtopic=4025
It's possible to add it and the screen controls work but it won't display the mp3 name.
On the other hand, someone else on the board also contacted Blitzsafe and they said they should have an video/audio adapter coming out sometime in the middle of August, which is about now. Here's that link.
http://www.siennaclub.org/forum/inde...=changer&st=15
http://www.siennaclub.org/forum/inde...showtopic=4025
It's possible to add it and the screen controls work but it won't display the mp3 name.
On the other hand, someone else on the board also contacted Blitzsafe and they said they should have an video/audio adapter coming out sometime in the middle of August, which is about now. Here's that link.
http://www.siennaclub.org/forum/inde...=changer&st=15
#38
Hello again.
Just wanted to maybe help someone out with a link.
I have been looking around for this unit.
I am posting this link to help someone only.The only reason I am not bidding is because he says it is untested and for parts use only?
Could be a good deal if you have some money to risk????
Now the linky!
http://cgi.ebay.com/ebaymotors/ws/eB...category=38653
Just wanted to maybe help someone out with a link.
I have been looking around for this unit.
I am posting this link to help someone only.The only reason I am not bidding is because he says it is untested and for parts use only?
Could be a good deal if you have some money to risk????
Now the linky!
http://cgi.ebay.com/ebaymotors/ws/eB...category=38653
#39
Originally Posted by k4kas
Hello again.
Just wanted to maybe help someone out with a link.
I have been looking around for this unit.
I am posting this link to help someone only.The only reason I am not bidding is because he says it is untested and for parts use only?
Could be a good deal if you have some money to risk????
Now the linky!
http://cgi.ebay.com/ebaymotors/ws/eB...category=38653
Just wanted to maybe help someone out with a link.
I have been looking around for this unit.
I am posting this link to help someone only.The only reason I am not bidding is because he says it is untested and for parts use only?
Could be a good deal if you have some money to risk????
Now the linky!
http://cgi.ebay.com/ebaymotors/ws/eB...category=38653